Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Zigbee level conversion

Status
Not open for further replies.
freddyp007

freddyp007

Junior Member level 2
Joined
Jul 6, 2009
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Freiburg
Activity points
1,417
I am trying to interface zigbee with my atmega32. Can i directly connect the Tx and Rx pins? Or do I need a level convertor?:?:
 

freddyp007 said:
I am trying to interface zigbee with my atmega32. Can i directly connect the Tx and Rx pins? Or do I need a level convertor?
Click to expand...

And which module would that be? What level of power supply exists for both sides?
 
Last edited:

Even though you didn't provide voltage supply level from both sides, I am taking a guess of 3.3V from the module side and 5V from the MCU side. In that case, please follow the thread below:

https://www.edaboard.com/threads/204270/


Hope that helped.
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top