Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] 220 VAC to 3.3 VDC converter

Status
Not open for further replies.
S

s1147895

Newbie level 2
Joined
Jan 11, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
11
Hi everyone,
Can't find appropriate solution to convert 220VAC to 3.3VDC with the following requirements:
- the size on the board should be no more than 40mm x 40mm x 15mm (W x L x H)
- power dissipation no more than 300mW
- max current 200mA
Any ideas? Every answer is appreciated.:)
 


That is nice! Thanks man:grin:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top