Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

2.4 GHz ZigBee - SNR ?

Status
Not open for further replies.
E

elbadry

Full Member level 6
Joined
May 6, 2005
Messages
347
Helped
72
Reputation
144
Reaction score
10
Trophy points
1,298
Location
Egypt
Activity points
3,884
What is the SNRmin needed for ZIgbee ( 802.15.4 ) for the 2.4 GHz Band?

There is a curve in annex E of the standard which gives a SNR = 3 dB (approx.) for BER = 5e-5 ( PER/(22byte*8bits/byte ); PER being the Packet error rate

Is this number correct? I just wonder if the x-axis in this figure is SNR or Eb/No

TIA
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top