Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

18F4550 VUSB pin problem

Status
Not open for further replies.
R

ranaya

Advanced Member level 4
Joined
Jan 22, 2012
Messages
101
Helped
4
Reputation
8
Reaction score
9
Trophy points
1,298
Location
Kelaniya
Activity points
2,164
Hello Every1.......

I was prototyping an HID device based on 18f4550. Check all connections and connect it to PC.
No message (even device cannot be recognized) popped up. Device is powered by usb bus line. Finally i check VUSB pin voltage. Voltage seems to be zero :(. I think it shud vary around 3 or 3.3 V. What cud be the problem here ??

This is my cct... I used mikroC HID example

**broken link removed**

Thanx and waiting for ur quick replies :)
 

Ok what's wrong with my VUSB pin ?? No voltage with respect to the ground !!! Can sm1 give me a clue abt it
 

I have faced the same problem. I connected a 1k resistor between vusb and D+. That solved the problem for me.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top