Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

16bit TTL Family Tester

Status
Not open for further replies.

fjpompeo

Advanced Member level 1
Joined
Nov 29, 2003
Messages
415
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Location
Brazil
Activity points
3,042
Hello,

I work with maintenance of electronic printed circuit boards used in bearing systems (subway and train) and soldered on these boards there are many 16-bit TTL integrated circuits. I can replace everything and the repair is done, but doing this is going to take a lot of time and effort and I want to know which one is defective, so I want to test all these integrated circuits. To give you an idea of which one I'm talking about, here are some part numbers SN74LVCC3245, 74ABT16245, 74AHC138, 74ABT16374, 74ABT16540, 74ABT16541. I need to know which integrated circuit is defective to build a history to manage my inventory and reduce defect analysis time because there are some very expensive and hard to find parts.

I searched the internet and found a few manufacturers like Elnec (BeePro), Xegcu (TL866) and others, but none of them have 16-bit TTL integrated circuits in the parts list that can be tested or programmed. Thank you all.
 
Last edited:

I don't know of any off-the-shelf system that can test multiple ICs in-circuit. Generally, these kinds of tests are performed by customized, expensive, test equipment, e.g., bed-of-nails testers.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top