Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

12V, 8.5A) 100W SMPS controll via potentiometer

Status
Not open for further replies.
A

andrie_20

Newbie level 3
Joined
Oct 3, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Philippines
Activity points
1,305
SMPS

i am making a (12V, 8.5A) 100W SMPS but i need to control the output using potentiometer. can you help me how make a control circuit using potentiometer? can you suggest a control circuit? PLEASE HELP. Thanks
 

SMPS

well you make the lower divider resistor variable with the pot
 

Re: SMPS

I think i already try that idea but still the same, maybe the set-up of resistor divider and potentiometer is wrong. can you shall the connection? please help
 

SMPS

How much do you need to vary the output? If you're using a PWM control chip, then the duty cycle (which determines your output voltage) is set by a RC network. Instead of a fixed R in the network, you can put a potentiometer. Changing the pot value will then change the duty cycle and thus the output voltage.
HTH
-Igs
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top