Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

100GB Ethernet - design of 4 lines CPWG with ADS?

Status
Not open for further replies.

asmodeus

Newbie level 6
Joined
Aug 16, 2009
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Bristol
Activity points
1,354
4 lines CPWG design?

Hello friends. Just today after some searches through the internet I found that useful site and I decided to become a memeber and maybe solve some of my questions. I have a project with the title "100GB Ethernet". At this moment I have a chip provided by a company that has a DQPSK modulator. This chip has 6 ports, 2 from the left side and four from the right. The thing that I have to do is to design four GCPW starting from these four ports and end at four K connectors. My first question is if I can do it with ADS (and some initial tips will be helpful)
 

Manjunatha_hv

Advanced Member level 3
Joined
Aug 3, 2005
Messages
810
Helped
240
Reputation
480
Reaction score
122
Trophy points
1,323
Location
INDIA
Activity points
8,691
Re: 4 lines CPWG design?

Hello,

Yes you can do that in ADS...But you can do the same more effectively using AWR Microwave Office...It has CPW models with interactive layout environment to quickly build your circuit schematic & layout...

Attached is the picture of the model...
Also see here
https://www.awr.tv/


---manju---
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top