1-Wire Temperature Control

Status
Not open for further replies.

tpetar

Advanced Member level 7
Joined
Sep 27, 2010
Messages
6,417
Helped
1,713
Reputation
3,456
Reaction score
1,673
Trophy points
1,393
Location
Pancevo-Belgrade, Serbia
Activity points
37,363
1-Wire Temperature Control
Original Web address: **broken link removed**

This free project was designed to measure and control temperature in the range of - 55°C to +125°C with 0.1°C accuracy. It is based on the popular PIC16F628A microcontroller of Microchip. The microcontroller uses the 1-Wire protocol ( sometimes known as a MicroLAN ) to communicate with a DS18B20 digital thermometer and a DS2405 addressable switch. The 1-Wire bus requires only one data line (and ground) for communication with a central microprocessor .The PIC16F628A chip implements several basic functions, such as an ON-OFF controller function, driving a LED display, reading and writing all 1-Wire devices. In addition, the controller can be fully configured and monitored from any Windows 9x , ME , NT , 2000 or XP PC via RS-232C serial port using an interface application. An overview of the main components is shown in figure 1.

**broken link removed**

Short Description:

ON-OFF control method
Heating or cooling control is available
Auto or Manual selections
Two line 2x16 LCD display and four push buttons
Front panel programming
RS-232C serial communications interface ( 2400 Baud ) to a personal computer
Interface application available for Windows 9x / ME / NT / 2000 / XP
Dallas' exclusive 1-Wire bus protocol that implements bus communication using one control signal
 

Status
Not open for further replies.

Similar threads

Cookies are required to use this site. You must accept them to continue using the site. Learn more…