Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

0/3volt to 0/5 volt level converter

Status
Not open for further replies.

young.microwave.eng

Full Member level 3
Joined
Oct 22, 2008
Messages
150
Helped
11
Reputation
22
Reaction score
11
Trophy points
1,298
Activity points
2,310
hi all
i'm going to translate the 0/3.3V pulse to 0/5V pulse with frequency of 2kHz.the circuit should derive 1.5A current.I meant the part is the interface between a 3.3V and 5V system and should deliver a current about 1.5A to the 5V system
 

hi all
i'm going to translate the 0/3.3V pulse to 0/5V pulse with frequency of 2kHz.the circuit should derive 1.5A current.I meant the part is the interface between a 3.3V and 5V system and should deliver a current about 1.5A to the 5V system

1. Do you want to source and sink 1.5A?
2. Dou you have 5V voltage source capable of delivering 5V @ >1.5A? or has the 5V be also converted from 3.3V?

:wink:
IanP
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top