Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

0.13um Tape out (fabrication) check list

Status
Not open for further replies.

niranjan1984

Newbie level 6
Newbie level 6
Joined
Mar 13, 2008
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,388
Hi
I will be fabricating a chip in TSMC 0.13um. Chip has RF front end working at 3.1-10.6GHz. This is my 1st tape out and I would like to know all the things I should be careful off before fabrication. I have done DRC and LVS which is clean. Also I have done RLC Extraction and post extraction simulations. What other things I should be doing? Should I be worried about EMI,EMC,ESD? Please let me know

Thanks in advance
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top