Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

TDS210 Communication module upgrade

Status
Not open for further replies.
J

jgorsk

Member level 3
Joined
Dec 31, 1999
Messages
54
Helped
10
Reputation
20
Reaction score
10
Trophy points
1,288
Activity points
352
tds2mm

Upgrade from TDS2CM to TDS2MM is possible.
All you have to do is:
1. replace 32kx8 RAM memory with 128k x 8/SO32/70ns/5V
2. Replace EPROM memory with 27C040 (512k x 8/PLCC32/70ns/5V)
programmed with "tds2mm.hex"

It works fine after the upgrade.
 

tds2cm

Hello
I have a TDS 210 equipped with TDS2MM.

Are you aware of firmware upgrades (and how to do it) ?
My scope has the following version number
TDS210 = v 1.19
TDSMM = v 1.04

TIA

PicMan
 

tds210 communication

Communication module's firware can be upgraded only
by replacing OTP EPROM. I don't know how to
upgrade scope's firmware.
 

tds2mm.hex

where can I find latest firmware for TD*S2CM?
jgorsk, could you pm me?
 

tds210

My TDS210 has firmware 1.06, is it possible to update it? How?
What are the enhancements in newer versions?

Regards
 

tds210 module

It's possible to upgrade the firmware. There are two types of TDS210.
Old TDS210 with PLCC EPROM memory in socket.
New with soldered FLASH memory.

TDS210 with firmware 1.06 is the old one,
so you have to replace the EPROM memoory
 
Hallo,

can anybody sen me the tds2mm.hex file??

thanks
 

Check PM...

Regards
rho-bot
 

Re: tds2mm

jgorsk said:
Upgrade from TDS2CM to TDS2MM is possible.
All you have to do is:
1. replace 32kx8 RAM memory with 128k x 8/SO32/70ns/5V
2. Replace EPROM memory with 27C040 (512k x 8/PLCC32/70ns/5V)
programmed with "tds2mm.hex"

It works fine after the upgrade.
Click to expand...

Can you send me "tds2mm.hex"?thank you very much.
 

Could I have "tds2mm.hex" ? thank you very much too. ;-)
 

I have TDS210 v 1.06 and CMV 1.02, can someone send me please tds2mm.hex?
 

Hi, I would like to try this upgrade to my TDS2CM (V1.04) module, fitted to a TDS220 (V1.16). Has anyone had a problem doing the upgrade? I hope one of you guys can help me find the TDS2MM.HEX software...:?:
 

Anyone can share the TDS2MM.hex. i would like try upgrade my TDS2CM.....
 

Hi all,

please, can anyone send me the "tds2mm.hex" file. Thank you very much
 

Hi,

Where can i get the tds2mm.hex file?

Thanks.
 

Hi,
I am also looking for the tds2mm.hex file. I would appreciate it if someone could send it to me.
Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top