Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

RF modulator with no sound to the out

Status
Not open for further replies.
S

Stavros84

Junior Member level 2
Joined
Dec 7, 2010
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,291
Activity points
1,439
Hello
I bought RF modulator (Mercury RF modulator) to convert Scart to Rf. The video works fine but there is no sound. I think that the problem is with Pal. The modulator that i bough is from United Kingdom. The PAL in UK is PAL I but in Cyprus is PAL G. Does anyone know how i can fix the modulator and work from PAL I to PAL G? Does anyone know if i change the crystal in the modulator the sound will work?
 

PAL I use 6MHz audio carrier offset, when PAL G use 5.5MHz.

Broadcast television systems - Wikipedia, the free encyclopedia

In your module if the audio sub-carrier oscillator use a 6MHz crystal, have to replace it with a 5.5MHz crystal.
If is using just an LC oscillator, tune its oscillating frequency (replacing L or C) to the desired one. You need a simple frequency counter for this.
 
Thanks vfone for the help. The crystal of the modulator have this number (J04-000044). I am not sure about the frequency that it work but maybe its 6 MHZ. So i will try to find a crystal 5.5MHZ to replace it
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top