Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Suggest me a software for designing a patch antenna array and MMIC

Status
Not open for further replies.
Abhishekabs

Abhishekabs

Advanced Member level 3
Joined
Jan 12, 2007
Messages
757
Helped
117
Reputation
234
Reaction score
45
Trophy points
1,308
Location
India
Activity points
5,537
Hi friends
I want to design Patch antenna array( about 60 Patches in row) & MMIC.
Which software should I use??
will ADS2006 be useful for both of this applications???
Suggest me softwares
Thanks
 

Re: Need Suggestions

BUT I also need to simulate(&design) MMIC???
HFSS is only for passive & not active.
Can I get both facilities in single software??
I agree with RAM but processor confiuration?
I need to simulate 120 patch elements connected to feed line at same time.
 

Need Suggestions

sure ADS can do it , but u need alot of memory
ads can be used to simulation both active and passive devices as well

khouy
 

Re: Need Suggestions

You could use CST MWS to simulate the patch; they can also use periodic boundary conditions to simulate a single patch in an infinite array approximation.

CST has a direct interface to ADS so you can have CST objects in your ADS schematic. Then you can simulate both together.

I am not aware that any other full 3D software tools have links to ADS. I think Sonnet has a link to ADS, but Sonnet is a planar EM tool.

--Max
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top