Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with booting Linux

Status
Not open for further replies.
V

vreddy

Advanced Member level 4
Joined
Aug 12, 2006
Messages
109
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
2,051
i have aproblem in booting the llinux sys.......
its checking all /boot files,, /root files.../home files.........stc.....
then its showing as starting nfs daemon......but could'nt open the gui mode.......
why ??? what could the problem b??

i have reboot the sys but coul'nt solve the problem........
the same problem its showing again & again.......

can any one help us out.......

thanks in advance
vreddy
 

Re: booting

vreddy said:
but could'nt open the gui mode.......
Click to expand...

Are you getting the command prompt? Which linux distribution you are using?
 

booting

what is the last thing u do in the GUI, did u change "\etc\inittab" file?
 

booting

You also should check your XF86config.conf or Xorg.conf file.
 

booting

or you can let it boot to runlevel 5 i think.
read up on "telinit", "inittab" and "runlevel".
 

Re: booting

It's probably as Anno says. Anyway, to see if this is the problem, start your system and once it gives you the login termanal (CLI), log in and run the command:

init 5

and see if that helps. If it then gives you a gui, then you have to modify some files to make it automatic depending on your distribution.
 

Re: booting

LINUX usually performs scan its partitions. So may be /root, /home and /boot are different partitions, and if thats so its OK.

In many LINUX distributions NFS server starts by default. Then try to remove it from your run level. There used to be tools like "ntsysv" in redhat.

For the GUI mode try "startx" after logging in from the command line.

vreddy said:
i have aproblem in booting the llinux sys.......
its checking all /boot files,, /root files.../home files.........stc.....
then its showing as starting nfs daemon......but could'nt open the gui mode.......
why ??? what could the problem b??

i have reboot the sys but coul'nt solve the problem........
the same problem its showing again & again.......

can any one help us out.......

thanks in advance
vreddy
Click to expand...
 

booting

U can boot into rescue mode (if using Fedora Core) and check the xorg.conf file, located in /etc/X11. Or edit /etc/inittab to boot into texe mode.
 

Re: booting

See Buddy
Reboot & go to BIOS.
Disable on chip Audio,Network support .
If I am not wrong you must be using Intel 945 series motherbords.
If true,then this will solve your problem.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top