Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Multi Metallization Layer in ADS

Status
Not open for further replies.

WanCai

Newbie level 3
Joined
Apr 12, 2006
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,312
Hello,

Does anyone know if in ADS Momentum it is possible to create and simulate a structure which consist of a metal layer structure on top of another metal layer structure without any substrate in between the two.


Thank You
 

Hello,

No you can't create such a structure. You must use an artifice for simulate that you want.
- first solution is to use only one metallisation layer and calculate a "apparent" resistivity of the total structure with real resistivities and thicknesses of the 2 original layers. This manipulation isn't always possible (if layout are differents) and this approximation is good when layers are not very differents.
-Second solution is use a substrate between the 2 layers and make a perfect via along the contact, with a height equal to distance topM1/bottomM2. This method allows to keep the frequency-dependence of both conductors but has its limitations too...
 

Multi Metallization Layer in @DS

Just use of substrate layer of Er=1, or maybe I don't understand the problem.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top