Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

NC drill file and board outline file

Status
Not open for further replies.
A

antenna_abc

Member level 3
Joined
Dec 22, 2005
Messages
58
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,835
Hi, everyone. I am wondering how do I generate the NC drill file and board outline file of the PCB in PowerPCB. And does the Gerber X (RS 274X) file itself contain these information?

And does AutoCAD can be used to generate these files? Thanks
 

File->CAM->Add->Document->NC drill
 
Hi,

Use the cam outut to generate your NC drill file.
For the board outline the easiest way is to generate a gerber file using only the board outline mechanical layer you have used.
You could use AutoCad but as it cannot generate excellon of gerber format files they would have to be DXF files and I would not recommend that.

Phil.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top