arschleben
Junior Member level 2
simulation errors in proteus
Hello, recently I build a circuit and load a Hex that is proven to work in a real circuit, but everytime I try to run the simulation in ISIS, I gt this error:
SIMULATION LOG
==============
Design: UNTITLED.DSN
Doc. no.: <NONE>
Revision: <NONE>
Author: <NONE>
Created: 06/03/05
Modified: 06/03/05
Compiling source files...
Build completed OK.
Compiling netlist...
Linking netlist...
Partition analysis...
Simulating partition 1 [D8FDED1F]...
Animation started sucessfully...
PROSPICE Release 6.7 SP0 (C) Labcenter Electronics 1993-2005.
SPICE Kernel Version 3f5. (C) Berkeley University ERL.
Reading netlist...
Reading SPICE models...
Loading library 'ANALOGD.SML'
Loading library 'APEX.SML'
Loading library 'BURRBROWN.SML'
Loading library 'ELANTEC.SML'
Loading library 'FAIRCHLD.SML'
Loading library 'INTERSIL.SML'
Loading library 'LINTEC.SML'
Loading library 'NATOA.SML'
Loading library 'SUPERTEX.SML'
Loading library 'TECCOR.SML'
Loading library 'TEX101.SML'
Loading library 'TEX301.SML'
Loading library 'TEX3_1.SML'
Loading library 'TEX401.SML'
Loading library 'TEX5_1.SML'
Loading library 'VALVES.SML'
Loading library 'ZETEX.SML'
Building circuit...
Instantiating SPICE models...
[U1] PIC16 model release 6.7 SP0 simulating PIC16877 device.
[U1] Loaded 256 bytes of persistent EEPROM data.
[U1] Loading HEX file 'ASM Progs\Maurodrum.HEX'.
FATAL: [U1] Program or EEPROM data has invalid address [2000] for this device
Real Time Simulation failed to start
Real Time Simulation FAILED.
Anyone knows what the heck does this mean?....what can I do?
Tnx
Hello, recently I build a circuit and load a Hex that is proven to work in a real circuit, but everytime I try to run the simulation in ISIS, I gt this error:
SIMULATION LOG
==============
Design: UNTITLED.DSN
Doc. no.: <NONE>
Revision: <NONE>
Author: <NONE>
Created: 06/03/05
Modified: 06/03/05
Compiling source files...
Build completed OK.
Compiling netlist...
Linking netlist...
Partition analysis...
Simulating partition 1 [D8FDED1F]...
Animation started sucessfully...
PROSPICE Release 6.7 SP0 (C) Labcenter Electronics 1993-2005.
SPICE Kernel Version 3f5. (C) Berkeley University ERL.
Reading netlist...
Reading SPICE models...
Loading library 'ANALOGD.SML'
Loading library 'APEX.SML'
Loading library 'BURRBROWN.SML'
Loading library 'ELANTEC.SML'
Loading library 'FAIRCHLD.SML'
Loading library 'INTERSIL.SML'
Loading library 'LINTEC.SML'
Loading library 'NATOA.SML'
Loading library 'SUPERTEX.SML'
Loading library 'TECCOR.SML'
Loading library 'TEX101.SML'
Loading library 'TEX301.SML'
Loading library 'TEX3_1.SML'
Loading library 'TEX401.SML'
Loading library 'TEX5_1.SML'
Loading library 'VALVES.SML'
Loading library 'ZETEX.SML'
Building circuit...
Instantiating SPICE models...
[U1] PIC16 model release 6.7 SP0 simulating PIC16877 device.
[U1] Loaded 256 bytes of persistent EEPROM data.
[U1] Loading HEX file 'ASM Progs\Maurodrum.HEX'.
FATAL: [U1] Program or EEPROM data has invalid address [2000] for this device
Real Time Simulation failed to start
Real Time Simulation FAILED.
Anyone knows what the heck does this mean?....what can I do?
Tnx