Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Proteus Simulation error

Status
Not open for further replies.
A

arschleben

Junior Member level 2
Joined
Feb 6, 2003
Messages
24
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
213
simulation errors in proteus

Hello, recently I build a circuit and load a Hex that is proven to work in a real circuit, but everytime I try to run the simulation in ISIS, I gt this error:

SIMULATION LOG
==============
Design: UNTITLED.DSN
Doc. no.: <NONE>
Revision: <NONE>
Author: <NONE>
Created: 06/03/05
Modified: 06/03/05

Compiling source files...
Build completed OK.
Compiling netlist...
Linking netlist...
Partition analysis...

Simulating partition 1 [D8FDED1F]...
Animation started sucessfully...
PROSPICE Release 6.7 SP0 (C) Labcenter Electronics 1993-2005.
SPICE Kernel Version 3f5. (C) Berkeley University ERL.

Reading netlist...
Reading SPICE models...
Loading library 'ANALOGD.SML'
Loading library 'APEX.SML'
Loading library 'BURRBROWN.SML'
Loading library 'ELANTEC.SML'
Loading library 'FAIRCHLD.SML'
Loading library 'INTERSIL.SML'
Loading library 'LINTEC.SML'
Loading library 'NATOA.SML'
Loading library 'SUPERTEX.SML'
Loading library 'TECCOR.SML'
Loading library 'TEX101.SML'
Loading library 'TEX301.SML'
Loading library 'TEX3_1.SML'
Loading library 'TEX401.SML'
Loading library 'TEX5_1.SML'
Loading library 'VALVES.SML'
Loading library 'ZETEX.SML'
Building circuit...
Instantiating SPICE models...
[U1] PIC16 model release 6.7 SP0 simulating PIC16877 device.
[U1] Loaded 256 bytes of persistent EEPROM data.
[U1] Loading HEX file 'ASM Progs\Maurodrum.HEX'.
FATAL: [U1] Program or EEPROM data has invalid address [2000] for this device

Real Time Simulation failed to start

Real Time Simulation FAILED.


Anyone knows what the heck does this mean?....what can I do?

Tnx
 

pic16 load invalid address

it appears tha the problem is related to a mismatch in the code size with the file HEX ..is probably too big to fit the emulated MCU ..

jus verify that the code produced was intended for the right component!!
 

real time simulation failed to start

arschleben said:
Hello, recently I build a circuit and load a Hex that is proven to work in a real circuit, but everytime I try to run the simulation in ISIS, I gt this error:

SIMULATION LOG
==============
Design: UNTITLED.DSN
Doc. no.: <NONE>
Revision: <NONE>
Author: <NONE>
Created: 06/03/05
Modified: 06/03/05

Compiling source files...
Build completed OK.
Compiling netlist...
Linking netlist...
Partition analysis...

Simulating partition 1 [D8FDED1F]...
Animation started sucessfully...
PROSPICE Release 6.7 SP0 (C) Labcenter Electronics 1993-2005.
SPICE Kernel Version 3f5. (C) Berkeley University ERL.

Reading netlist...
Reading SPICE models...
Loading library 'ANALOGD.SML'
Loading library 'APEX.SML'
Loading library 'BURRBROWN.SML'
Loading library 'ELANTEC.SML'
Loading library 'FAIRCHLD.SML'
Loading library 'INTERSIL.SML'
Loading library 'LINTEC.SML'
Loading library 'NATOA.SML'
Loading library 'SUPERTEX.SML'
Loading library 'TECCOR.SML'
Loading library 'TEX101.SML'
Loading library 'TEX301.SML'
Loading library 'TEX3_1.SML'
Loading library 'TEX401.SML'
Loading library 'TEX5_1.SML'
Loading library 'VALVES.SML'
Loading library 'ZETEX.SML'
Building circuit...
Instantiating SPICE models...
[U1] PIC16 model release 6.7 SP0 simulating PIC16877 device.
[U1] Loaded 256 bytes of persistent EEPROM data.
[U1] Loading HEX file 'ASM Progs\Maurodrum.HEX'.
FATAL: [U1] Program or EEPROM data has invalid address [2000] for this device

Real Time Simulation failed to start

Real Time Simulation FAILED.


Anyone knows what the heck does this mean?....what can I do?

Tnx
Click to expand...

if it is possible pm me your code along with dsn file and i will check what wrong
 

Hi
I got really close on this circuit, but it does not answer my Proteus?
Please can everyone have overwhelmed me with all circuits can run Proteus
Excuse me for English
Which is more accurate and precise circuit works؟
The schematic of the circuit but with a few changes.
I'm looking forward to helping you with clear and complete answers.You may also e-mail your answers to
Thank you
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**

this is my email
ehsanasghari68@hotmail.com
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top