Help me to connect Nokia 3310 with hyperterminal using FBUS

After reading very much, I have understood that I can connect my nokia by a FBUS cable to the hyperterminal and send AT commands and telephone would answer with some response, is it correct??. My telephone does not answer anything, someone can help me?.

Thanks

fbus nokia 3310

you cant connect it directly to the phone. if you want to send AT commands then you should have a DLR-3P cable connected to a data phone like the Nokia 6210.

nokia fbus commands

Nokia 3310 don't have an internal modem, so you can't connect to it using Hyperterminal.
check this link:
**broken link removed**

3310 fbus

peace upon you,

I tried many types of mobiles to connect it to PC like (NOKIA 3210,3310, SEIMENS M35,C35,S35 and others) but seimens is the only one work and MOST steady at connect it to serial port and sent AT commands to it, and you find easy pdf to help you to deal with AT command.

Added after 1 minutes:

peace upon you,

I tried many types of mobiles to connect it to PC like (NOKIA 3210,3310, SEIMENS M35,C35,S35 and others) but seimens is the only one work and MOST steady at connect it to serial port and sent AT commands to it, and you find easy pdf to help you to deal with AT command. I make my graduation project with C35.

fbus cable 3310

can't u send any of the AT commands to a nokia 3310??

fbus commands

The nokia 3310 don't have a Internal modem(wich answer to AT command)
the phone himselft answer only to FBUS command

nokia fbus

What are the various FBUS commands, if the phone can only responds to FBUS commands.
What are the capabilities of FBUS, I've seen an SMS controller thingy, but can I do more basic stuff like dialing a phone number with BFUS??

fbus command

I recommand you to Spy Nokia Softs
to get the FBUS Command
and the correct Answers
i will post some later when i go to home

nokia 3310 connect to pc

What do you mean by
"Spy Nokia Softs"

Is it a software suite, or do you mean to reverse engineer nokia software to get the FBUS commands

nokia 3210 at commands

i mean to intercept the data in comport

* Get HW&SW version **********************************************
1E-00-0C-D1-00-07-00-01-00-03-00-01-60-00-72-D5

you must send this command first before any other


* Reset ***********************************************************

1E-00-0C-D1-00-07-00-01-00-03-00-01-60-00-72-D5
1E-00-0C-40-00-06-00-01-64-03-01-60-77-24


*battery status
1E-00-0C-40-00-06-00-01-7E-17-01-60-6D-30

this is a Ex in my 5110

1E-0C-00-40-00-3A-01-01-7E-17

20-32-34-34-39-20-20-32-36-33-30-0A-20-20-20-20-30-20-20-32-36-34-32-0A-20-33-33-20-

31- ' assci = 1

30- ' assci = 0

30- ' assci = 0

20-20-20-35-32-0A-20-20-30-20-20-20-20-30-20-20-20-30-00-0A-80-01-41-78-A1


Mean Battery level 100% full
possible for 100 75 50 25

*Date/clock

1E-00-0C-11-00-06-00-01-00-62-01-42-13-36

read number in Simcard

E-00-0C-03-00-09-00-01-00-01-

03- ' 2 = ME , 3 = SM - SiM memory

01- ' Indice

00-01-46-00-

57- 'XOR odd number

0A 'XOR the others " "



check sms

1E-00-0C-02-00-0A-00-01-00-07-02-

01- ' position of sms

01-64-01-42-

10-29 checksum look above


delete sms

1E-00-0C-14-00-08-00-01-00-0A-02-

01- ' Indice

01-42-

11-54 checksum

nokia fbus at commands

how do I spy the com port

3310 fbus interface schematic

use LGCoMSPY++,ComLite,Sermonitor, ect ect

Re: nokia 3310 and FBUS

Hello guys,

Please help me REALLY understand the difference beteween AT commands and FBus?

I am really baffled.

Thanks