Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[REQ]How to find out the rise time and fall time in picture?

Status
Not open for further replies.
S

staric

Member level 4
Joined
Sep 26, 2003
Messages
79
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,288
Activity points
661
When M0 an M1 turn on, the threshold voltage in Fig(a),(b) is low. When M0 and M1 turn off, the threshold voltage is high. But in Fig(b). I want to know how to find out the rise time and fall time in Fig(a) and (b). Which one is larger? Assuming there are parasite capacitor in MOS. I couldn't calculate out the rise time and fall time.
 

There is a rise-fall time function in the Calculator? or maybe if the simulation is running, you can zoom in and use the markers.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top