Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

I2C Communicating At Different Speeds?

Status
Not open for further replies.

PRATIK.PATI

Newbie level 6
Joined
Jun 7, 2017
Messages
11
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Location
Bangalore
Activity points
95
Hello, Is it possible to connect and communicate two I2C devices with each other on the same bus if the two devices work on different speeds?

E.g. Device one is at 100 KBPS and Device 2 is at 400KBPS
 

400KBPS devices will work on a 100KBPS bus (obviously at slower that optimum speed) but the slower device may not work at the higher speed. They are electrically almost identical so you can mix them on one 12C bus.

Brian.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top