Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need clarification whether given project is low level or high level transmitter

Status
Not open for further replies.
K

Khazi

Newbie level 1
Joined
Mar 20, 2018
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
8
Design and implement an AM transmitter and receiver with carrier frequency in the range 700kHz to 1000kHz. The receiver should be superheterodyne type with IF of 455kHz. Audio input should be given to the AM transmitter using microphone, and the output of the AM receiver should be played on a audio speaker.
 

Khazi said:
Design and implement an AM transmitter and receiver with carrier frequency in the range 700kHz to 1000kHz. The receiver should be superheterodyne type with IF of 455kHz. Audio input should be given to the AM transmitter using microphone, and the output of the AM receiver should be played on a audio speaker.
Click to expand...

you haven't given any info with which to give a meaningful answer to your question
do you have schematics for this planned transmitter and receiver ?
what sort of power levels were you planning ?
do you have specific test equipment to check frequency, power and other essential factors ?
if it is more than ~ 1 W, do you have the appropriate broadcast licence to put a transmitter on the air ?


Dave
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top