Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to draw a three slot antenna in HFSS

Status
Not open for further replies.
E

enahmed

Newbie level 1
Joined
Feb 25, 2018
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
11
How to draw three slot antenna in HFSS

Hi everyone,
I am designing waveguide fed three slots antenna in Narrow-wall by HFSS. I took box to design waveguide and then tried to subtract the slots from Box but HFSS did not allow this.
Does anyone have the experience of designing a 3 slot antenna in HFSS and you can help me?
The 3 slotted waveguide dimensions which are as follows:
1- waveguide length = 60 cm, waveguide width =9.5 cm
waveguide height =4.5 cm, the waveguide is for operation at 2.45 GHz. is made from Aluminum.
2.slots length = 6.1 cm,slots width =0.6 cm, Slot spacing center to center for other slot=16 cm. end space = 4 cm
please find attached

Thanks in advance.

Very HappyVery Happy
 

Attachments

  • waveguide 3 slots.jpg
    waveguide 3 slots.jpg
    139.7 KB · Views: 90
  • Project Ansoft..png
    Project Ansoft..png
    82.3 KB · Views: 98

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top