thannara123
Advanced Member level 5
Opamp Gain clip the output some certain level of voltage
As a part of one of my project , am using with a differential op-amp LM741,as following circuits
I am giving input 0 to 230 volt ac (50Hz) directly .
In this circuit .the output will be voltage clip some certain level (about 500millvolt) see the pic below
what is the problem ?
I am attaching the proteus simulation file below
https://www.edaboard.com/attachment.php?attachmentid=144320&stc=1&d=1517740192
I need the output if 1 volt at the input the output will be 5millivolt (ignored the level shifting dc).
As a part of one of my project , am using with a differential op-amp LM741,as following circuits
I am giving input 0 to 230 volt ac (50Hz) directly .
In this circuit .the output will be voltage clip some certain level (about 500millvolt) see the pic below
what is the problem ?
I am attaching the proteus simulation file below
https://www.edaboard.com/attachment.php?attachmentid=144320&stc=1&d=1517740192
I need the output if 1 volt at the input the output will be 5millivolt (ignored the level shifting dc).