Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Microcontroller shielding

Status
Not open for further replies.
J

jingyiprecision

Newbie level 2
Joined
Feb 2, 2018
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
9
Adwaittronics said:
I have RF application board / PCB with RF frequency range of 134MHz to 174MHz ,where RF module is used and the module is shielded .
But I want to shield the Microcontroller on the PCB too ,Can any one suggest a suitable metal material for shielding ?
Also problem is , I don't have any provision to solder the metal shield to the PCB so is there any other way where i can use metal film or foil or sheet for shielding without soldering it to board.
Click to expand...

Normally the material of shielding is tinplate or nickel silver ,both easily to solder ,It's depend on your needs .
maybe you can visit http://www.jingyiprecision.com to know more about it .
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top