Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Physically unconnected component or pins

Status
Not open for further replies.

adeniyiMokesioluwa

Newbie level 4
Joined
Nov 14, 2016
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
66
Good day, All

I am connecting a MIM capacitor, another MIM capacitor and a transmission line in a T-topology using ADS KEYSIGHT.

However, it keep showing an error:

"the net has one physically unconnected component or pins" and i have not been able to find it.

I have attached 3 figures.

I need help.

Thanks for your assistance.
 

Attachments

  • Figure_1.JPG
    Figure_1.JPG
    67.9 KB · Views: 61
  • figure_2_layout.JPG
    figure_2_layout.JPG
    62.8 KB · Views: 65
  • figure_3_error_message.JPG
    figure_3_error_message.JPG
    133.9 KB · Views: 67

What's at the other end of those three flight lines in
the first image? Looks like the error purports that one
of those connections is not made.

Might use a DRC run to check for gaps you can't see
in routes you think are completed. Might use an
extracted view (I do not use ADS but presume there
has to be that intermediate database between the
original drawn layout and netlist) and try selecting
the trouble net, looking for "broken branches".
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top