Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Latest PCB Pad Repair Techniques

Status
Not open for further replies.

katyradcliff

Newbie level 6
Joined
Dec 11, 2017
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
Rolling Meadows
Activity points
174
BEST Inc is providing the easiest PCB pad repair techniques through this article. There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. As per revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. It is also true that only a limited number of repairs are allowed by the customer while most of the pad repair needs expertize methods and materials. BEST have the highly professional technicians having experience of 15+ years who can take your PCB Pad Repair to the next level. So, visit this article to know more about the latest PCB pad repair techniques or call us at 847-797-9250.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top