Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[CST DS] Six ports Combination Using Couplers

Status
Not open for further replies.
G

goroks

Junior Member level 1
Joined
Nov 13, 2017
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
105
Hello!

I work on an Antenna design with CST Microwave Studio. The Antenna has 6 ports that have to be combined 2 by 2.

Port 5 and 6 have a phase sift of 180. 1 and 2 quadrature sift. Same for 3 and 4.

I tried to used The block diagram on CST to add the couplers but can't get the s-parameters.

coupler.PNG

I am not sure that connecting the couplers this way will work. Could anybody help me out?

Thanks ^^
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top