akshaybhavsar
Full Member level 2
Hello,
I am using SIM808 module in my application.I have to send packets to server every 1 sec.data will have upto 150 bytes including.Below is my command flow.
AT+CGREG=1
AT+CREG=1
AT+CSQ
AT+CADC //READ ADC
AT+CIPSTART=TCP,"ip ADDRESS","PORTNO"
AT+CIPSEND=1
SEND DATA
I have to repeat atleast these AT command after every 1 sec.Is it possible to set that much low frequency(1 sec)?
My existing system takes 6 sec
I am using SIM808 module in my application.I have to send packets to server every 1 sec.data will have upto 150 bytes including.Below is my command flow.
AT+CGREG=1
AT+CREG=1
AT+CSQ
AT+CADC //READ ADC
AT+CIPSTART=TCP,"ip ADDRESS","PORTNO"
AT+CIPSEND=1
SEND DATA
I have to repeat atleast these AT command after every 1 sec.Is it possible to set that much low frequency(1 sec)?
My existing system takes 6 sec