Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PCB panelization and pick & place report

Status
Not open for further replies.
A

archusvijay1

Member level 3
Joined
Mar 12, 2014
Messages
61
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
553
Hi,
we successfully create a small pcb of size 20*40mm in orcad layout,,but for assembling in pick and place machine we need the pcb size of minimum 500*500 MM ,so we want to panelize the pcb and generate a pick and place report.
please help us with this

Thanks in advance
 

Hi,

Let the PCB manufacturer make the panelization.
They need to give you the X and Y offsets.
Don't forget to place passer on your PCB.

Klaus
 

First point is to define a panel type, V-scored or milled with bridges. 500 x 500 mm panel sounds unusually large for small PCB items.

Best way is to let the assembly house define the panel and order the PCB and stencils.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top