Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

caliber antenna drc rule check warnings

Status
Not open for further replies.
S

sanjaysharmaiitk

Member level 1
Joined
Jul 28, 2017
Messages
33
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Location
KANPUR
Activity points
280
calibre antenna drc rule check warnings

these warning are coming during antenna rule check in calibre.
these warning are harmful or not.
how to remove these warnings.
warnings
ACUTE angle on layer M2 at location (64.11,0.99) in cell subil_pngatebuff_ESD122.
ACUTE angle on layer M2 at location (64.11,0.99) in cell subil_pngatebuff_ESD1.
ACUTE angle on layer M2 at location (64.11,0.99) in cell subil_pngatebuff.
ACUTE angle on layer AA at location (28.73,325.56) in cell subil_midconer2.
ACUTE angle on layer AA at location (34.43,317.94) in cell subil_midconer2.
ACUTE angle on layer AA at location (36.86,315.64) in cell subil_midconer2.
 

Re: calibre antenna drc rule check warnings

Usually can be safely ignored.
 

Re: calibre antenna drc rule check warnings

Just look at the layout, in the neighborhood of those coordinates, and if you detect acute angles, and they are prohibited by design - fix them...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top