fjpompeo
Advanced Member level 1
Dear sirs,
I have a PLC with 12 x 127Vac inputs and need to be drived by 24V sensors. My first try was using relays but the sensors are very fast and run at +-10Hz so the stress of the relays will destroy then in a very short time. Was thinking to use one MOC3010 for each channel. According to the manufacturer of the PLC each input looks like the attached schematic. My idea is attached too.
Any idea will be very usefull.
Regards,
Fernando
I have a PLC with 12 x 127Vac inputs and need to be drived by 24V sensors. My first try was using relays but the sensors are very fast and run at +-10Hz so the stress of the relays will destroy then in a very short time. Was thinking to use one MOC3010 for each channel. According to the manufacturer of the PLC each input looks like the attached schematic. My idea is attached too.
Any idea will be very usefull.
Regards,
Fernando