Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

HFSS: resonances in FSS simulation

Status
Not open for further replies.

artsyd

Newbie level 1
Joined
Dec 2, 2017
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
10
Hi all,
I'm trying to simulate array of octagonal loops at 1.5THz using Floquet port and master/slave boundary conditions. I've read the only tutorial on Floquet, but still unable to get decent results.
I am plotting the power that is being absorbed by the structure and getting resonances above center frequency of 1.5THz. Are those resonances real, or are they some HFSS convergence glitch due to meshing? I've tried to use different elements and shift the frequencies down to 20GHz, but still got same results..
Attached geometry and simulation results.
Thanks
geometry.pnggraph.png
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top