Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

FMC HPC1 and HPC2 in virtex 7 vc707 board usage ???

Status
Not open for further replies.
A

anilineda

Member level 3
Joined
Mar 10, 2016
Messages
54
Helped
2
Reputation
4
Reaction score
1
Trophy points
8
Activity points
466
A 400 pin 10 x 40 position connector form factor on virtex 7 FPGA is
used for both versions.
1. The HPC version is fully populated with all 400 pins present.
2. The LPC version is partially populated with 160 pins.

I know these FMC's are useful for logic expansion,
when LPC is used and HPC is used which one to decide among two and what are the factors decides them ?
 

They are electrically the same, so the only deciding factor is how many user pins you need for your application and whether or not you will have to interface to an LPC connector from your LPC/HPC connector.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top