Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Quartus Project from DE2 board to DE1

Status
Not open for further replies.
N

nizdom

Member level 2
Joined
Feb 21, 2016
Messages
42
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
358
Hi guys! I want to ask something. I found a project with all the verilog codes and sof but the project is for a DE2 board and I wanted to run the project in a DE1 board. What changes should I do in the project? Please help me. thanks.
 

It will depend what peripherals are in use. The DE1 lacks some features of the DE2 so if it uses these obviously it cannot be ported.
if you are using the same things, then you need to change the target device and the pinout. Also, note that the DE1 has a smaller device - how full is the DE2 device?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top