Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS periodic boundary condition

Status
Not open for further replies.
K

klusener

Newbie level 2
Joined
Jul 14, 2012
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,296
Hi

I am simulating a rectangular box with some copper materials (fibres) inside. I am applying a voltage (frequency) at one end of the box and checking the electrical flow from the other end. However, I have very limited knowledge on the periodic boundary condition of this type of design. I would like to apply a periodic boundary condition so that the box is surrounded by it (except for the two sides - the frequency input and output side). Can anyone give me some idea how I should design the periodic boundary condition here. Thnx
 

I suggest you ask an admin to move your post moved to the Electromagnetic Design and Simulation forum. There are some people with a lot of experience there. I use HFSS, but don't have any idea about what you are doing.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top