Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SOLID STATE RELAY WITH....

Status
Not open for further replies.
B

BGA

Advanced Member level 4
Joined
Apr 25, 2001
Messages
111
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
751
I'M SEARCHING A SOLID STATE RELAY WITH Ton LESS THAN 50uS AND Toff LESS THAN 150uS.
VOUTMAX MUST BE NON LESS THAN 50V (100mA).
ANY HELP ?
THANKS IN ADVANCE.
BGA
 

Is there some reason why you don't want to use a transistor or a thyristor(triac)??
 

No.... an example?
 

two mosfets in commen source connection :wink:
 

Is the switch going to be unipolar or bipolar?
I mean is the current through your load DC or AC?
 

OPTOISOLATED, UNIPOLAR AND DC.
 

Sorry if it sounds too simple but you seem to be looking for a transistor optocoupler with an additional transistor for current gain(in other words a darlington whose first transistor is inside the optocoupler and the other is external).
 

yes... is there an opto with darlington output?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top