Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

changing board size in altium

Status
Not open for further replies.

proyex

Newbie level 4
Joined
Nov 2, 2007
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,323
hi, im new in altium, so i cant find a way to change default board size, i mean i have started my pcb, i need a 10X10 cm pcb board size, but altium by default have a board 4"x6" size, i have tried to set my pcb size when i start my pcb, but board size still 4"x6", so i have made my design in default size but i need change sizes, thanks
 

1) sketch you board outlines on any mechanical layer on mechanical 1 for example
2) select only the outlines
3) select "Define from selected objects" from "Designe --> Board shape" menu


 
You can also draw your board size by using command "redifine board size"
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top