Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

GPS interfacing with microcontroller

Status
Not open for further replies.
K

kulachi

Newbie level 5
Joined
Mar 25, 2009
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,370
i am making a project of gps data logger
can it b done with 8051 µC or i have to use AVR controller
also i have to interface PC-AT keyboard with it so this controller should also support that
help me on this plzz
thanks
 

A lot of GPS devices have the serial interface that you can connect to your controller.

Take a look at:

**broken link removed**

For good start.

And for the Keyboard, there are 100s of applications available for free on the internet:
If you had done a simple search on EDABOARD you would have found this:



Hope it helps,

Cheers,
/Farhad
 
Last edited by a moderator:

con anyone help me on how to interface a microcontroller with a GPS reciever
 

@bramin19
usually the GPS has an serial interface,you should connect the serial port pins of microcontroller with GPS module.
Which GPS module you are using?
 

bramin19 said:
con anyone help me on how to interface a microcontroller with a GPS reciever
Click to expand...

do a search in this forum .. you will get your answer.. I have answered it in many posts from many years...

DONT RE-OPEN OLD THREADS IF THAT DOES NOT SOLVE YOUR PROBLEM
 

actually i am trying to implement a project which generates an audio signal based on which direction i have to go and in which direction i am. so i am trying to use GPS reciever to calculate the present location . i have no thought of which GPS reciever to use.

can u suggest which one to use?

as i am familiar with 8051 i would want to interface GPS with 8051.






cool.man said:
@bramin19
usually the GPS has an serial interface,you should connect the serial port pins of microcontroller with GPS module.
Which GPS module you are using?
Click to expand...
 

I have use GPS-610F from rfsolutions **broken link removed**
It supports NMEA format
you can also search for other gps modules which are common

Best Regards
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top