Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS: Port Field Display v10 vs. v11

Status
Not open for further replies.
R

rfmw

Advanced Member level 2
Joined
May 10, 2001
Messages
543
Helped
93
Reputation
190
Reaction score
51
Trophy points
1,308
Activity points
3,979
HFSS v10 had a lot better Port Field Display than v11 has. Version 10 had dense vector-based field plot, while version 11 has coarse arrow-type field plot which is too coarse and field distribution is not clear.

How do I get densed field display?
 

Why mot use the Field Overlays (features) where you have greater control of the display format?

(next button down from the Port Field Display, That is what I usually do.)
 

It is not possible to use Field Overlays (features) in case of solution for ports only :(
 

You can change the display scale for better display. And HFSS V11 has better accuracy for port solver. As you know, it often happens that the impedence of open transmission line is wrong, for example, I often get the impedance of over 60 ohm for 50 ohm microstrip line.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top