Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Cadence Virtuoso Analog Artist: Multiple result in one table

Status
Not open for further replies.

Gigan

Member level 1
Joined
Feb 26, 2006
Messages
41
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,596
Re: Cadence Virtuoso Analog Artist: Multiple result in one t

I do a dc analysis (operating point) of a circuit with number of transistors.
Using the "Tools/Table" option of "Result browser " i can place desired parameter, for example "vce", of one transistor (Q1) in to the table. Then vce for next transistor in to next table, an so on...

my question is:
How I can automatically place in to one table "vce" values (or other parameter) in the same time for all available transistors Q1, ..., Qn of the complete circuit?

Added after 3 hours 8 minutes:

Added after 1 minutes:

Gigan said:
I do a dc analysis (operating point) of a circuit with number of transistors.
Using the "Tools/Table" option of "Result browser " i can place desired parameter, for example "vce", of one transistor (Q1) in to the table. Then vce for next transistor in to next table, an so on...

my question is:
How I can automatically place in to one table "vce" values (or other parameter) in the same time for all available transistors Q1, ..., Qn of the complete circuit?

Added after 3 hours 8 minutes:

I have already myself soved this problem.

Thank you. :D


Added after 3 hours 14 minutes:

solved
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top