Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
There is no pure inductive load and capacitive loads practically (small resistance will be there)
Inductive loads are the one whose inductance is high compare to its Resistance.
For example induction motors, or a simple coil.
Capcitive loads are the one whose capacitance is high compare to its Resistance.
for Example PF correction capacitors, synchronous motors or simply a bulk capaciators;
We catagories these on the power factor also.
inductive : Its lagging PF
Capacitive : Its Leading PF
Resistive : Its Unity PF
hope it helps.
-VJ
the resistve load is a pure resistance load such as resistor, whreras inductive load such as ideal coils , and capacitve load is like ideal capacitors ( the difference between capactive and inductive load one makes the current lead the voltage and the other is the opposite)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
