Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

characterizing operational amplifier

Status
Not open for further replies.

wonbef

Full Member level 3
Joined
Oct 13, 2004
Messages
188
Helped
8
Reputation
16
Reaction score
6
Trophy points
1,298
Location
Nanshan, Shenzhen
Activity points
1,083
hi,all,

how to simulate and measure the input/output impedance of operational amplifier. pls give me some methods. can you give me some papers about analysis and simulation of operational amplifiers. thanks in advance!

kind regards,
 

in spice code, give the command .op and .tf (transfer function) of output voltage.
u can see the input and output impedances seen in the output listing file.
 

dear analog_prodigy

Do you know another method at the spectre?
 

in spectre, maintian the DC input level and add a ac current at the output node, run ac simulation and get the ac voltage magnitude of the output node, the output resistance is equal to the ac voltage magnitude devided by the ac current, if the ac current is set to be 1A, then the output resistance will just be equal to the ac magnitude.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top