Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] spice to spectre netlist conversion command other than spp or spectrespp

Status
Not open for further replies.

Knowledge.seeker

Junior Member level 2
Joined
Oct 1, 2018
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
153
i have netlist file in hspice format and want to convert it into spectre.
I am working on Linux machine so need a command to do so.
spectrespp and spp are not working.

Is there any other command to convert??
 

spectrespp and spp are not working.
Why can not spp work ?

Is your Netlist extracted one from post layout ?

And even if spp fails, Spectre can often read HSPICE netlist directly.

If your netlist is LTspice or Pspice format, you have to modify it manually.
 
I am using "MMSIM15.10.257" package of spectre.It does not containg spp or spectrespp

Yes , netlist is extracted one .

Yes spectre can read hspice netlist also using simulator lang=spectre.
but i want to convert hspice file to spectre
 

command to convert spice netlist to spectre netlist:
spp -iofile netlist.sp netlist.scs :grin:
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top