Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Proteus ARES pcb package for this connector is needed, HELP?

Status
Not open for further replies.
E

eng_ahmed22

Full Member level 3
Joined
Jun 7, 2005
Messages
189
Helped
20
Reputation
40
Reaction score
5
Trophy points
1,298
Activity points
2,944
ares pcb package

hi there.
from where can i get the Proteus ARES pcb module for this connector????



63_1180437353.jpg
 

proteus pcb package

hellooo.
anybody there??????????????
:cry:
 

ares package connectors ares

have you tried to design it???
maybe I'll do it for weekend...
 

proteus connectors ares

just measure the distances and put down the appropriate pads. Then place the appropriate conections. This isn't hard.
 

criar conector proteus

From memory, the front and rear are 4 standard IC Pins appart (4 * .100") appart, and the side is exactly mid way between the two
 

pcb package+proteus

i think it is the conn2 connector...it is two pin connwctor
 

pcb package + proteus

thanx averybody
i'll try to design it and i'll upload it here.
i suggest here in this topic to share the PCB packages which designed by us.
what is your opinions?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top