Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to run ngc2edif utility in xilinx ISE 8.1i?

Status
Not open for further replies.
E

EDA_hg81

Advanced Member level 2
Joined
Nov 25, 2005
Messages
507
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
4,808
ngc2edif

How to run ngc2edif utility in xilinx ISE 8.1i under GUI interface?

Thank you in advance.
:cry: :D
 

ngc2edif xilinx

i too have the same problem i tried ngd2edif in ise 6 command terminal and it says "The ngd2edif program and generation of back-end EDIF netlist for simulation is no longer supported in the current software. Please use netgen program to generate Verilog or VHDL netlists for simulation".
 

ise 8.1 register id

You will be having ngc2edif.exe file in d xilinx installation folder,
u just need to run the same through the command line(if you are using Windows).
 

ngc2edif use

On ISE 8.1i Where I can find command terminal?

I have added the command "ngc2edif" in the "other command ......" under translation process.

Please let me know...thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top