Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

"visual basic and GPIB interfacing"

Status
Not open for further replies.
S

Schaum

Junior Member level 1
Joined
Jul 23, 2001
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
19
GPIB card

I folks.
I have a Ines ieee488 GPIB card. This card is not compatible with labview and I've been talked that a small modification can be done in order to make it compatible with labview.
Any help?
 

Re: GPIB card

Hi,

I'm using Ines IEEE488 with Labview without problems. First you have to install the systemdriver, then you have to install Agilent I/O Libraries.
Then you can access the GPIB Card in the Ni MAX Setup program.
If you need the driver kit pm me.

Good luck, Halabat.
 

Re: GPIB card

In my project they have just used a GPIB to USB convertor not a card from national instrument and that worked fine in Labview
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top