ahmad_abdulghany
Advanced Member level 4
- Joined
- Apr 12, 2005
- Messages
- 1,206
- Helped
- 102
- Reputation
- 206
- Reaction score
- 22
- Trophy points
- 1,318
- Location
- San Jose, California, USA
- Activity points
- 11,769
vlsi + dsp job openings
Dear all,
Below a list of requirements for a VLSI-DSP/Communication systems focus engineer. The guaranteed engineer, is supposed to travel to US within two monthes and work in a project for about 3-6 monthes.
Allowed experience is 3+ years.
If you know any other one can fit with these requirements, please let him send his updated CV to me as soon as possible.
Here're our requirements:
Baseband VLSI Engineer - DSP/Comm Focus: The successful candidate should have the following qualifications
• PhD/MS in EE with related experience.
• Strong RTL coding skills using Verilog and/or VHDL.
• Matlab and C programming skills.
• Knowledge of communication systems (e.g., OFDM, QAM) and digital signal processing algorithms.
• Experience designing and verifying VLSI designs for DSP such as FIR filters, FFTs, and FEC decoders (e.g. Viterbi, RS, or Turbo).
• Strong knowledge of fixed-point two's complement arithmetic.
• Knowledge of design trade-off for low power implementation.
• Experience with real-time emulation on FPGAs is a plus.
• Laboratory test and verification experience is a plus.
Please in the e-mail context, give yourself a degree from 0 to 10 (best) between parantheses behind every requirement of the above, to be able to measure well the level of candidate.
Best wishes,
Ahmad,
==============================================
Ahmad Abdulghany - IC Design Consultant
Scenario Design Services
Cell : +20 10 655 789 1
Tel/Fax : +20 2 291 4566 / +20 2 291 1364
ahmad_abdulghany@scenario-consultants.com
Address : 4 Salah El-Din St., Heliopolis 11341 Cairo Egypt
URL : www.scenario-consultants.com
==============================================
Dear all,
Below a list of requirements for a VLSI-DSP/Communication systems focus engineer. The guaranteed engineer, is supposed to travel to US within two monthes and work in a project for about 3-6 monthes.
Allowed experience is 3+ years.
If you know any other one can fit with these requirements, please let him send his updated CV to me as soon as possible.
Here're our requirements:
Baseband VLSI Engineer - DSP/Comm Focus: The successful candidate should have the following qualifications
• PhD/MS in EE with related experience.
• Strong RTL coding skills using Verilog and/or VHDL.
• Matlab and C programming skills.
• Knowledge of communication systems (e.g., OFDM, QAM) and digital signal processing algorithms.
• Experience designing and verifying VLSI designs for DSP such as FIR filters, FFTs, and FEC decoders (e.g. Viterbi, RS, or Turbo).
• Strong knowledge of fixed-point two's complement arithmetic.
• Knowledge of design trade-off for low power implementation.
• Experience with real-time emulation on FPGAs is a plus.
• Laboratory test and verification experience is a plus.
Please in the e-mail context, give yourself a degree from 0 to 10 (best) between parantheses behind every requirement of the above, to be able to measure well the level of candidate.
Best wishes,
Ahmad,
==============================================
Ahmad Abdulghany - IC Design Consultant
Scenario Design Services
Cell : +20 10 655 789 1
Tel/Fax : +20 2 291 4566 / +20 2 291 1364
ahmad_abdulghany@scenario-consultants.com
Address : 4 Salah El-Din St., Heliopolis 11341 Cairo Egypt
URL : www.scenario-consultants.com
==============================================
