Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What happens if i use 100fF instead of 250fF parasitic capacitance at the input stage

Status
Not open for further replies.

farhanashirin

Junior Member level 1
Joined
Oct 12, 2006
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,388
Hi all,
Can u tell me anybody of, what will be the problem if i use 100fF instead of 250fF parasitic capacitance at the input stage which is paralal with the bondwire inductor?

Plz,send ur commends.

Thanks in advance.
 

Re: Help me.....

in low freqency, smaller parasitic capacitance will not cause problem. but if you are dealing with RF circuit, impedance matching is crucial. so you should be very careful to adjust the capacitance.
 

Re: Help me.....

It seems you should offer more exact information about your question!

Regards,
SAZ
 

Re: Help me.....

Actually my dear friend,I want to enhance my band width by using pmos at the input stage.I increased upto 4Ghz,but my desired bandwidth is 10Ghz,60 dbΩ.I used .13µm BICMOS teachnology.
Would u help me, plz?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top