Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to control angle of the permanent magnet field DC motor

Status
Not open for further replies.
Ramesh_maharjan

Ramesh_maharjan

Member level 2
Joined
May 19, 2006
Messages
50
Helped
7
Reputation
14
Reaction score
0
Trophy points
1,286
Activity points
1,553
control angle

What should i do to control the angle motion of DC motor with permanent magnet field.
 

pm motor control angle

perhaps you should check out servo systems; dc motors with feedback to control the positioning of the motor shaft. try to google out.
 

Re: How to control angle of the permanent magnet field DC mo

You can't control too much. As long there is a coil in the stator and a coil on the rotor, and usually those are connected in series, the only one thing you could do is changing the voltage across the series coil or the current value. PWM is the most common methode, but also linear regulation is a choice for small motors.
There is a limit low voltage (current) below which the mechanical couple at the motor shaft is dramaticaly small. The real chalange with DC motors is keeping a constant couple at variable speed.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top